...Crown Vic is coil on plug. There are no plug wires. Need to run a diagnostic scan to find which cylinder is mis-firing. When you running diagnostic scan the cylinder mis-fire will be represented by a ...
coil pack on crown vic We think the coil pack is bad, but how do we test it to make sure? How long do they usually last? And what is the primary and secondary resistance supposed to be? 1999 crown vic
6, 7, 8. Changed plugs and new coil packs. The car still shows misfire codes and still runs bad. Any ideas? your egr on that side is dirty try cleaning it aslo check intake boltsaround those clyinders
changed coil pack wont start on 99 crown vic Check the ignition module,and the crankshaft sensor.
...crown vic with 250000 miles and a 4.6 police intercepter..when the car is cold it runs like new but after warming up I get a misfire on # 3.coil pack,plug and fuel injector have all been ...
2001 crown vic has a misfire on #5 does it have coil packs for each cylinder,have you tuned it up lately
...heads, you'll need to remove each coil pack. A long extension and 5/8in spark plug socket and an extendable magnet will help. Also, you may need to remove the fuel rail to get to move the coil
crown vic started backfireing then would not start seems to not be getting any gas could this be my coil pack? It sounds more like a timing belt has failed. check for spark at the spark plugs If there
Question about 1995 Crown Victoria
...coil packs, TPS sensor, checked vacuum lines, cleaned MAF sensor and still does a bit but not as bad it seems...what could this be at such low milage? I have faced the same thing with my car, this is ...
Question about 1995 Crown Victoria
crown vic to stutter and to not start? my 98 vic stutters usually in wet weather plus on one occasion it wouldn't start for about a minute. what could this be? That a questions with many answers, none
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions