...lock light still flashes. The dishwasher will not start. According to the Technical Service Data Sheet for this dishwasher this symptom appears to mean that one or more of the buttons on the console ...
...control lock) When i try to clear it 2 or 3 of thelights flash at once. Control Lock means that the entire dishwasher is locked, for child safety purposes. It's normally cleared by holding the "No ...
whirlpool dishwasher lock light is on Means the control panel is locked. You need to hold down a button usually with a little lock picture for 5 - 10 seconds to unlock it.
...light and that mumbling sound. any ideas?! thanks, daz :) If that's the clean lite flashing that is a fault code. That means the control sensed that the heater in the d/w did not operate 3 times in a ...
Question about 24 in. DU1100XTP Built-in Dishwasher
...light flashing 7 times and won't start. That means the control sensed that the heater in the d/w did not operate 3 times in a row. so the unit locks out. First remove the kick plate and you may have ...
Question about 24 in. DU1100XTP Built-in Dishwasher
...light still flashes. 7 flashed followed by a short pause.(if that means anything)THanks I had the same problem recently and a repair person came to my home to fix the dishwasher. He said he had to ...
Question about 24 in. DU1100XTP Built-in Dishwasher
...the control lock light mean? You don't state your make or model but in general it locks out the control keypad to prevent kids from turning on the machine. whirlpool dishwasher child lock does not ...
Question about 13853 Stainless Steel Dishwasher
light.... Does it blink 7 times, pauses, and repeats? Or does it blink 3 times (or some other number). The most common problem is 7 blinks wich means "water not heating error". This could be caused by
Question about 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher
...light under lock It is possible that the machine does not start off the cycle because there are errors or feedback from the inputs. For the program to start up the main program controller must ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions