Questions & Answers for: Makita cordless drill battery charger

Question about 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140

1 Answer

...drill - do these things just spontaneoulsly die like that? and if not, what would have cayused this? thanks? Clamp one side of [power line of your charger insert baterry pack,if amphere increase the ...

Ad

Question about 3/8" Dr. 14.4V Cordless Drill Kit

1 Answer

...battery on the charger it only charges for a few minutes then it stops charging , and the battery only has 1-3rd of its charge .how do i fix this problem without buying a new battery If it is under ...

Ad

Question about 6019DWE 3/8 Cordless Drill Keyless Chuck Rev 7.2v 600 Rpm

1 Answer

...cordless 6019d chuckless drill. thanks As long as the charger voltage and the battery voltage match (7 volts) there should be no problem. A fast charger just runs more current thru the battery (per ...

Question about 3/8" Dr. 14.4V Cordless Drill Kit

1 Answer

...Drill Battery Will not Charge I have a 14.4V drill battery that will not charge. Battery is lithium (model 1434)) and charger is a DC1411. Red light on charger comes on when battery is inserted and ...

Question about 12 Volt Cordless Drill/Driver Kit

2 Answers

...the round ceramic looking piece with the copper wire around it. but look at the whole board. Can I change the brushes on my 12V Makita Cordless drill Model No 6227D? If yes, how do I do it?

Question about 12 Volt Cordless Drill/Driver Kit

1 Answer

battery charger does not work it is a model DC1414 purchased about 5 years ago The battery could be bad after 5 years. Check the contacts on the charger with it plugged up using a volt meter to see if

Question about 12 Volt Cordless Drill/Driver Kit

1 Answer

...Cordless Drill with PA14 batteries. The PA14 battery is 14.4V. The battery may fit in your tool and might work for a while but the motor isn't made for that battery. The way to check the batteries is ...

Question about 12 Volt Cordless Drill/Driver Kit

1 Answer

...cordless drill when I put any of the 3 batteries that I have on charge the charger flashes the red LED indicating that they are over temprature is this the charger at fault as I find it hard to ...

Question about 12 Volt Cordless Drill/Driver Kit

1 Answer

...charger buy Ace Trading - WF Drills 60109005 12 Volt Drill Charger $8 - 8 stores Bosch 72068 3 hr.cordless Drill Charger $20 - 2 stores 18 Volt Drill Charger (60109004) $12.98 - ...

Question about 12 Volt Cordless Drill/Driver Kit

1 Answer

cordless drill which has a Fast Charger (DC1290A) and 1220 Ni-Cad battery. Problem is that the battery only charges for 4 seconds and the charger shuts down. I need some input to decide if the problem

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Makita Drill Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...