Question about Cable 19.2 Volt Grip - To - Fit Cordless Drill/Driver Kit - 9984
...cordless drill drill bits slip/spin in the keyless chuck. this problem began when the drill was about 3 years old, under light shop use. i replaced the chuck, but the problem continues. this happens ...
Question about 2887 - 06 Factory - Reconditioned 18V 2 - Speed Cordless 3/8" Drill/Driver with Stud Finder
...cordless drill, and this weekend, while using a hole saw bit, the drill got stuck, and torqed all the way around (my wrist is no more flexible), but now the drill no longer functions. Pulling the ...
Question about 12 Volt Cordless Drill/Driver Kit
...cordless drill I opend my makita cordless drill because i was using it at work and it started sounding like something broke I found the problem and fixed it but I cant close it properly and I dont ...
Question about DC900KL Heavy - Duty 36 - Volt Cordless 0.5" Hammerdrill/Drill/Driver Kit
not spinning pull the trigger and will spin for a second and stop, then a few seconds later will spin again and stop. Battery is fully charged. Had the same problem figured out it was a wiring problem
Question about DC900KL Heavy - Duty 36 - Volt Cordless 0.5" Hammerdrill/Drill/Driver Kit
...cordless power drill. Somehow the clutch got stuck and it won't spin or open where you put the drill bit in. The motor seems to be spinning, think the problem is just in the clutch, we were able to ...
...cordless impact driver stopped working. Now the tool spins to a stop instead of braking when the trigger is released. A local tool repair shop told me to replace the switch, but I want a second ...
Question about BDF452HW Factory Reconditioned 18V Cordless Lxt Lithium Ion 1/2" Driver Drill Kit
...bits The drill uses a cordless chuck (part bits go into) you will need to hold the outside ring of the chuck and spin it to loosen the jaws on the bit. Then spin the chuck the opposite way to ...
ryobi 18v drill stuck chuck Drill bit is stuck in the chuck. easy to fix with the drill not running grab the bottom part of the spinning part of the drill nearest the drill's motor. then grab the ...
Question about 2610-20 18V Cordless M18 High Performace Drill/Driver
...cordless drill with a bit broken off inside and the chuck won't open. When I turn the chuck in either direction it spins freely but does not open or close. The bit is broken off right at the tip of ...
Question about 2610-20 18V Cordless M18 High Performace Drill/Driver
...cordless drill won't spin but can tighten chuck by hand My Makita BHP451 won't spin...the torch light comes on when the trigger is pulled but the chuck doesn't spin....although I can still loosen and ...
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions