Questions & Answers for: Fiat Doblo crank shaft bolt

...crank shaft oil seal as gone and when have had a look to sort it some bright spark as welded the crank shaft bolt end , so I can't get a spanner or allen key or nothing on it , I took it to the ...

Drive shaft noise at about 35 to 40mph athruming sound can be heard' it's almost like a knock but not quite it then lessons as you get a little faster over 55mph it almost disappears. I'm ...

Drive shaft noise at about 35 to 40mph athruming sound can be heard' it's almost like a knock but not quite it then lessons as you get a little faster over 55mph it almost disappears. I'm ...

how to take off a drive shaft You take the 4 bolts out that hold the u joint in and pull the drive shaft aaway from it.  Then you should be able to pull it out of the rear end

I need to bleed the hydraulic clutch system Your hydraulic clutch system is a wonderful smoothly operating method of engaging and disengaging the engine from the transmission. Most of the time. ...

...crank on tick over When you refitted the belt, was there a spacer ring refitted correctly?Also, check for any sprocket key was fitted correctly and that the crankshaft pulley bolt was refitted ...

Engine crank but not start Hi, Take a spark plug out and replace it back into the spark plug lead and earth it onto a steel part of the body(make sure it's touching something steel). Have somebody ...