Questions & Answers for: cross pen

...pen-shaped piece of plastic. When I have tried to re-calibrate it the 2nd cross-hairs never register, the computer just beeps when I tap it (no matter the screen orientation). Although, when I first ...

Cross pen fell on the floor and won't work my Cross pen fell with the pen tip rolled out and now when you put pressure on the pen tip to write something, the pen tip goes up into the pen housing which

...questionmark on it) at same time until a menu appears on screen Press A Now touch all the little crosses with your pen that appear on the screen switch leapster off and restart if still not

...Cross pen that's missing it's ebony back. Where can I have it fixed? I am not sure where you are based, but AT Cross do run repair services. If you follow the links below you may get further ...

How do you advance the lead in a pencil without traking off the cap ? Just press the top of the pen until you reach the led you want to come out.

...cross ball pen top center ring or lid there is already a hole in center top of my ball pen All Cross pens are guaranteed for life here is a link to there repair ...

...pen it tends to now draw around 2mm below where the cross hairs are shown. Yet when used with Animate Pro2, there is never a problem. I upgraded to Harmony for obvious reasons. I have tried ...

writing tip on pen will not come out when I twist the bottom was working, tried to turn the bottom to get writing tip out, won't come out. spring is in place as it should be Pull up the top of the pen

...crosses (+) on the screen in sequence. • These crosses may be touched in any order; but be sure to touch the center of each cross. • Use care not to damage the screen surface with the tip of the

...pen can be returned to Cross for repair at no cost to you. Guessing lead is jammed--pull it apart --the Base un screws--or take a needle & push it thru were led comes out --or cross customer ...