Questions & Answers for: crossmember

...the automatic transmission cooling line quick-fit connections. Matchmark the upper radiator crossmember and adjust the crossmember to the left or right. Fig. 10: Radiator upper crossmember ...

broken tranny crossmember my car has a broken crossmember the car dont shift right it slips in high gear could this be the linkage or the transmission With that Crossmember Broken It is putting a ...

...wheel.Feels like coming out of floorboard. Hello, it sounds like you have an issue with the front crossmember popping. GM had an issue with the crossmember. You must remove the crossmember and slot ...

transmission crossmember clearance? inline 6 to 327 in a 69 c-10 my inline had a 3 speed manual and my 327's got turbo 400.  I know i need to fab a rear support for the t-400 but do i need to ...

...knuckle. Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig. 21). 5)Remove the lower control arm rear bushing retainer bolts ...

...from the air cleaner assembly. Fig. Before removing the hood latch, mark its location on the crossmember with a paint marker or other tool Fig. Once the hood latch is matchmarked, remove it ...

...on the transmission on the frame. There is a hose with a steel plug in it or the hose plugs onto a crossmember of the frame. If it plugs onto the crossmember, look underneath that crossmember for

...classic,found allen screw on bottom right side. Is this it? If it's on the underside of a frame crossmember with a large hose connected to the upper side of the crossmember back around the ...

...nut, remove steering knuckle from the lower ball joint using tool KM 507 B. remove control arm to crossmember nut and bolt, remove rear crossmember to body bolt and remove control arm.torque

How do I replace a front suspension crossmember on a Chevy Silverado 2500 HD 4x4? The crossmember is about 2 feet long, it attaches to the front suspension on both ends. I need to replace a bent one. ...