Questions & Answers for: cruiser starter relay

...hey!!i have the same prob with my cruiser u mite need to give the starter more earth!i did that with mine n it worked fine!u also mite need to check the cable that comes frm the starter to the

...from battery to fuse box 06 p t cruiser wont start unless i roll it off replaced cable from fuse box to battery had battery checked good battery a bad starter or starter relay could cause this ...

...starter relay for starter staying engaged, keep alt plugged in has nothing to do with starter staying engauged, to test starter relay, jump at relay bat + post with red/bk wire on solonoid, if cranks ...

...cruiser non turbo 2.4 liter has been having battery issues. now it wont start, and the ignition will not turn over at all. the lights and radio work in the car, and ive tried jumping the car off with ...

...cruiser and has not had starting problem since. Sounds like the starter drive,usually they will disengage early ,only crank the engine for a revolution or so.Could just replace the drive ,or just ...

...cruiser only starts sometimes but when it does I can't turn off because it won't start again for a couple hours new starter new alternator new battery new crank sensor new starter relay can't figure ...

...cruiser will not start. Replaced starter, battery good, get no click when turning key to start try to jump the starter whit a wire a the selenoid if that wok posible problem whit range sensor , fuse ...

...Cruiser is due for a starter, due to age. Try shifting gear selector to N and try to start. If it starts, the Neutral safety switch is not working in park position. Make sure E- brake is applied ...

...cruiser i was stopped at the light my car died and now no crank no start have replaced the starter crankshaft sensor ignition when i hook up the code reader it tells me no communication Check for 5 ...

cruiser 2.4turbo no crank no start battery good lights good strong blower motor good power windows good starter relay clicks. Is this a starter problem? Probably, but before you change it swap starter