Questions & Answers for: cylinders misfire santa fe

Question about 2006 Santa Fe

1 Answer

...failure p0172: evap system. intake blocked p0778: exaust valve control. solenoid/ecu faukt p0300: cylinders misfire. check ht/ignition leads p0301,303,304,305,306: same ht leads hope this

Ad

...santa fe is misfiring on cylinder 1. I need to know which coil is cylinder one so I can change out the coil? You need to be more specific when public one post; Hyundai engine sizes... 2003 Hyundai ...

Ad

Question about 2001 Santa Fe

2 Answers

...santa fe. i had it checked and its showing a cylinder 5 misfire. what should i do? do tune up cap , wires etc.. also check coil for this cylinder, This means that you will need to replace the coil ...

misfire in cylinder 4 and 6. I have replaced injectors, spark plugs, wires and ignition coil. What could cause the misfires? Run a compression check , possible causes leaky valve seal, bad rings , bad

...santa fe wont go off . fixed fuel injectors like it said but it still reads cylinder 5. Fuel Injectors seldom fail and don't need work or any type of cleaning Cylinder #5 --- I assume your ...

...Santa Fe 2.7L V6 has a misfire on cylinder 1, where is cylinder 1 located Odd cylinders are on the firewall side of the engine. Number one should be near the passenger side or front of the

...misfire on 2001 Hyundai Santa Fe sometimes the fuel injector can be out of range but this would give a trouble code. then check spark plug to see if it is wet or fouled. check plug wire for external ...

...Santa Fe 4 cylinder keeps misfiring. Each time it is put on the computer it gives different codes for different spark plug misfires. We find the spark plugs and coil pack. It still hes Changing coil ...

Question about 2001 Santa Fe

1 Answer

cylinder 3 and 4 misfire First time engine light came on it was a cylinder 4 misfire, 2nd time it was cylinder 3 misfire. It idles rough at stop signs when in drive. If I put it in park or natural, ...

Santa Fe 2007 p0311& p0321 Code reading hi sensor Are you sure theses are the codes given? They read as... P0311 = Cylinder 11 - misfire detected. P0321 = Crankshaft position (CKP) sensor/engine speed

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...