Questions & Answers for: Honda dim tail lights

...Dim lamps are ususally caused by a bad ground, however, first things first, have you replaced any tail light or signal bulbs lately? if so, there's your culprit - the wrong bulb or incorrectly ...

...shift linkage. I have a 1990 Honda fourtrax, the head lights don't work, just quit working the one on the left hand side is lit but very dim. The tail light works fine. What could be wrong??? ...

...brake light switch wire from the tail light input by the control box by the battery, the tail light dims to the proper intensity. Something is feeding the line juice between the brake light switches ...

dim, there is usually something afoul there. i would bet that your husband plugged the wrong type bulb into the socket, that is why it did not come on at all with the new bulb. there are two different

lights are powered thru the tail lamp relay along with the outside parking lights. There may be a solid state controller that provides the ground circuit and the dimming control. You may need a wiring

tail lights in either fuse box on my 2005 Honda Accord, What is labeled? I don't see one labeled for tail lights the park tail lights, run over 20 lamps inside and out. are you saying all 20 are dead?

...http://hondatech.info/downloads/Auto/Manuals/Accord/ low beams dead. are the parking lamps all working, tail, and side lights and all interior dimming park lamps, with HL switch set to park

tail lights and dash lights is no working I check fuses all ones are good did you check them in the dark to see if , not just dim? what sub model, EX, or LX? the LX is very different. the car has 2 ...

...tail lights or after market bulbs anywhere in you running lights system, such as turn signals front or rear marker lights corner lights etc, if you do have Hids or leds,, and you didn't put in ...

...tail lights or after market bulbs anywhere in you running lights system, such as turn signals front or rear marker lights corner lights etc, if you do have Hids or leds,, and you didn't put in ...