Questions & Answers for: dimm memory

dimm memory stick. thanks for your time To answer you there is no difference DIMM= Dual In Line Memory Modual 64 bit transfer Dimms replaced Simms when pentium ll came out. DDR= Double Data Rate Newer

SPD memory DIMMs be used with the SE440BX-2 motherboard. However, the BIOS will allow the use of non-SPD DIMM memory. So the max you can go is 3 x 256 MB. Thanks and please take a moment to rate fixya

...DIMM sockets and supports the following memory features: 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts Unbuffered, single-sided or double-sided DIMMs with the following restriction: ...

...DIMM sockets using the memory configurations in this section. ? Installing DDR DIMM. Other than the recommended configurations may cause memory sizing or system boot failure. ? In dual-channel ...

...DIMM sockets and supports the following memory features: 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts Unbuffered, single-sided or double-sided DIMMs with the following restriction: ...

...memory of the printer. X DIMM Type 1 RAM Y Device Location 1 DIMM Slot 1 2 DIMM Slot 2 3 DIMM Slot 3 4 DIMM Slot 4 ZZ Error Number 0 unsupported memory 1 unrecognized memory 2 unsupported memory size ...

...DIMM and memory configurations must adhere to the following: â?¢ DDR266 DDR registered DIMM modules â?¢ DIMM organization: x72 ECC â?¢ Pin count: 184 â?¢ DIMM ...

...(1) Installed - Installed - (2) - Installed - Installed (3) Installed Installed Installed Installed CPU FSB DDR DIMM Type Memory Frequency 800 MHz PC3200 400 MHz 533 MHz PC3200/PC2700 400/333 ...

...memory DIMM socket on the mainboard.8 Press the holding clips on both sides of the memory DIMM socket outwardto release the memory DIMM (a). Gently pull the memory DIMM out of thesocket (b).9 ...

...memory DIMM row/bank is re-enabled and the system boots normally. NOTE: If more than one DIMM (or more than one DIMM set) is installed in the server and one memory (or one memory set) row/bank is ...