switches to standby at high volume I experienced this problem when I first got the thing, I went through some menus and changed some things (cant remember what). Working fine for about a month, I ...
turns on for three seconds then turns off!! whats wrong?? check your speaker wire, if you have the 2 wires touching it will shut down the rec. Take a good look at where thet go into the speaker, ...
...disk error occurs and the system is unable to read the disc. Rest FM and other parts are working properly. Would be looking forward for your perusal action. If this problem occurs only at this cd/dvd ...
Need belts for DD 1030. How does one find the specs for cross referencing belts? You only need to measure the diameter of the belts in MM, as belts are often universal. You can allow a few MM either ...
how to take out the dropped disc in the player. thank you. Have a Nice Day! First of all remove any disks that are in the tray and then unplug the power cord for the unit. Use a Philips screwdriver to
When powering up the Sherwood RVD-7090R Amp, it switches off again almost instantaniously.... Any suggestions ?? hi, First of all remove all the speaker connections from the amplifier. After that ...
Question about Rd-5405-350 Watt 5.1 Receiver - Kit
How to connect 4 wire in-wall speaker to Sherwood RD-5405 I need to connect (4) 4-wire speaker wires to the Sherwood receiver. Speakers are in my daughters new apartment ceiling. I've tried ...
Question about Newcastle R-771 7.1 Channel A/v Receiver
Getting sound on turn-on is intermittent Upon turn-on, I get no sound. If I go to standby and turn-on again, I get sound (and I hear what sounds like a relay click when it turns on). Doesn't happen ...
pioneer cld 2950 The player stops and opens the drawer by itself when a disc is placed in the player to run and play The disc drive may be unable to read the disc and ejects it.
Question about RX-4109
my Sherwood RX-4109 sounds "quieter" and "muddier" than it previously did. Also the "click" when it turns on in quieter. Wondering what this could mean Main board fault. Shorted component/s at its ...
Usually answered in minutes!
43 Questions
37 Questions
45 Questions
19 Questions
27 Questions