Questions & Answers for: Gateway display goes blank

...goes to blank screen Hi, Whenever I turn on my monitor it displays the computers output briefly (~half a second) before going blank. I have tried the monitor on two other computers with the same ...

...goes blank.turn the montor off and on one or two times and it seams ok It appears that the display resolution set in your display properties is out of the range that the LCD can display. Try this. ...

goes black is because the inverter fails to provide power to the LCD Display. The only way to fix this is to open up the FPD: *note these are instructions for the most popular FPD 1730* 1.there should

...goes in and out My Gateway 5350 laptop has an issue--at first the display would not work and once I took the battery out and repowered based on instructions I saw on this site it did come back up to ...

...goes blank for a while, let say 15 minutes (again time vary), I then press fn + f5 to switch between screen mode. Poof the display come back on the laptop screen, however this may or may not stay on ...

...goes blank after a few seconds after startup. Monitor goes blank after a few seconds after start up. Gateway FPD1975W, TFT LCD Monitor Sounds like the inverter is broken or have a short circuit. This ...

...display may have bad internal main ac to dc power supply which goes into "shutdown-mode"!! You or qualified electronics technician will need to investigate/evaluate unit to make decision on fix or ...

...goes blank and displays "no signal" you have to install your window properly please install it properly with your origional windows cd and also rubb your system ram golden area with a ...

...display an image for about 2 seconds and then it goes to a black screen. if I unplug the monitor from the back of the computer and plug it back in, I get a picture for about 2 seconds again and then ...

...display problem and when it goes to a blank screen the music also stopped so don't think its a display problem. Took out the fan and cleaned it out, cleaned out the heat sink, and cleaned off the old ...