Questions & Answers for: Acer Aspire display goes blank

...goes blank Might be something wrong with your display settings. Between the Acer logo and Microsoft logo, try pressing F8 about twice per second. A menu appears. Use the arrow keys and choose the one ...

goes blank with active cursor 4. Same in both normal and safe modes 5. Same with internala nd external displays 6. Disk lite on continuously, but disk actually runs intermittantly. Had an unsolicited

...goes blank returns to wallpaper...then requests password and states that the computer needs to be unlocked Windows inactivity for screen saver is set. If you want it to deactivate. On Windows desktop ...

...goes blank There could be 3 possible reasons for a vertical lines 1. Driver for graphics card needs to be updated 2. Grpahics card faulty 3. LCD problem try connecting an external monitor and see if ...

goes blank and stops just before getting to were you put in the pass word... Are you using Window XP, Does it display the Windows logo on start up, if so try to go to safe mode by pressing F8 on start

...goes blank with lines after booting Probaly it is time to upate the drivers. We can do one single steps before updateing it. Go to device Manager> Display adapters> right click on the display ...

...goes blank... Farmville screen goes blank Install adobeflash player to your lap top so that the graphics of farmville or any other facebook games will be displayed properly.. here's the link to ...

...goes blank. Possible failure of the display drivers/ the hardware in the section of the motherboard. Since the fault is confirmed with the external display the motherboard needs a probe and you might ...

...goes blank then returns to display the same error screen. try to shut down the laptop completely. Remove cables and battery into it. Then press and hold power button for 8 secs. Reinsert the cables ...

...goes totally blank and after a short time re-appears in parts, before going blank again. I have tried removing and re-installing the video drivers but this does not resolve the problem. Can anyone ...