...document feeder keeps trying to feed Sharp Fax FO 5500 When faxing, the document feeder feeds all the pages normally. When all pages have feed, it keeps trying to feed more. The roller turns as if ...
document feed roller check to see if its not stuck or damaged Does it sound like it is trying to feed at all or does it feed about half way and stop. You may be looking at a feed rollers problem, worn
Question about AR-M237 Digital Copier
...feed to fax a document, but will feed to copy..? Hi we tried to fax a document and the document did not feed right away, then a message appeared saying can not locate original document. It won't feed ...
...feed the document in, and do a reverse of the document for the second scan. In the paper feeder, the machine feeds the paper in and reversed the copy back into the machine, flips the copy then feeds ...
document feed roller(s) are dirty and need to be cleaned. Just open up the panel where the documents go into and look for the feed roller that feeds the documents in. It is a grey or black rubber tire
...document at a time. How do I correct this so I can feed documents in to be scanned Do you have problem with multiple copies or just wit puling scans? Try to say that the original is feed from adf, ...
Question about imageCLASS D480 Black and White Copier
some Document Feed Rollers etc. FC8-9251-000 is the pickup roller FL3-1023-000 is the separation pad FM3-8679-000 is the feed roller That would fix 80% of the problems you may encounter Whit Item, Inc
...fax machine) The error code 71 indicates a problem with the scanner motor for document feed. Could be timing problem, or motor problem. If tries to feed documents probably timing, no feed
...feed the document through, it tries but you can just hear it turning. The printer contantly reads "document loaded" without anything in it. After a while of trying to feed the document ...
...Feed Document The ADF in my Brother MFC 8820D will not feed a page through. It "picks up" the document and pulls it in a little bit, but does not pull the document through the rollers. I ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions