Questions & Answers for: dodge charger check engine light

...dodge ram 2500 5.7 Hemi. with engine swap from a 2007 Charger. The engine runs Rough, starts rough, and we have two dead cylinders. While driving it it does not like to get over 2000 RPM. Checked for ...

...check engine light was on and little red dot flashing (I think it had something to do with alarm). Had towed to dealership and they said car was no longer recognizing the key signal, and would be ...

engine oil light flashes on for fractions of a second then remains off for several minutes before repeating. started same time noise from engine began, noise follows rpm of motor. clicking like a ...

...dodge charger r/t car has been sitting for over 3 1/2 months. Battery went dead and had battery replaced. However speedometer not working, turn signals not working and gas gauge not working. The car ...

...dodge charger Disconnect both cables from your battery for about 30 minutes. At that time reconnect them and see if the light's gone off. YOU HAVE TO USE A CODE SCANNER TO ERASE CODE TO TURN OFF ...

...dodge charger 2006, what i need to check? THe lightning bolt (ETC) light is flashing and the traction control light is on also have code 2173 when i put the key to on-off-on-off-on, what i need to ...

...dodge charger keeps stalling when I have a full tank of gas and either stop or slow down. What is causing this? May have water in gas tank or gas lines. check fuel pressure pump could be failing.if ...

...charger 2007 R/T front control moduel because my car fog lights not working then fog lights comes on then after one hour car dashboard lights turn on then off and car engine stopped. is there any ...

...engine light are on... With red lightning bolt flashing... What could this be? beats me but this seems to be the answer What Does the Lightning Bolt Symbol Mean on Dodge Charger Instrument

...Dodge Charger limp mode and P2127. Getting code on dash P2127 replaced throttle pedal, battery, and throttle body, still throwing code and lightning bolt continues to flash won't go over 3,000 rpm's. ...