Questions & Answers for: dodge neon code p0340

engine trouble codes: p0016 p0340 p0344 p0456 &p0501 are showing up on the odbII code reader when i run a diagnostics test on the car You can look up the codes on Wiki site

...dodge neon sxt is giving me a p0340 code how do i fix this A code P0340 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken the ...

95 dodge codes P0340 P0134 P0340 is camshaft position sensor and P0134 is O2 sensor - bank 1, sensor 1. (this is the one before the catalytic converter) Hope this helps.

...Dodge Neon means, "No CAM signal at PCM." So the camshaft position sensor or its wiring is at fault. The car will start and run without the cam signal, but it will run in "limp-home" mode and ...

...Dodge Neon Code P0340 152000 miles the car died on the interstate at 60 mph & while coasting to the side it started back up & this is the code I had at the parts store. When it started up the ...

...dodge neon showing P0325 and P0340 codes at same time. I have a 04 dodge neon showing P0325 and P0340 codes at the same time. It also has problems starting at times cranks but take a few cranks to ...

...Dodge Neon Issues (HELP) I had a test ran on my 1999 dodge Neon and the following results showed up. Position Sensor (A circuit) Bank 1 or Single Sensor P0340 Camshaft Circuit Malfucation P1491 The ...

dodge neon. they are p0325 and p0340. the car has problem starting and misses badly for a while. What is the problem and how do i fix it? thanx for the help! the p0325 code pertains to a knock censor.

...dodge neon ? code p0340 refers to camshaft position sensor(CMP) sensor A bank 1--circuit malfunction===causes--wiring--CMP sensor--ECM . Check the wiring to the sensor, check the air gap for the ...

...dodge neon cranked without the cam sensor connected. what's wrong with this picture? i unplug the camshaft sensor, crank the car and it started so i check for codes, came out with p0340, so i plugged ...