Questions & Answers for: Mitsubishi door handle

Question about Mitsubishi

1 Answer

door handle. I replaced the handle already, but now the handle does not match the rest of my car. I would like to find a handle the same color as my car. My car's exterior color is a dark gray, almost

Ad

...door handle i just did one on passenger door, roll window up, use 1/4" sockets, on door end, by door latch there is a 10mm, level with door handle, take off door panel inside, you'll see the window ...

Ad

...door handle on 97 mitsubishi eclipse On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will ...

...door handle broke so how do i replace it? how do i install? on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on ...

Question about 2002 Lancer

1 Answer

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...

...door handle? Take out inner door handle bezel-1 philips screw. Then remove 2 large screws under inner door handle. The lower light lens can then be removed exposing 2 small philips screws. Remove ...

...at the handle inside, loose. Remove the internal handles, remove the inner door panel and have a look at what's come adrift. Usual issue is the rod from the handle to the door lock has

...door handle on a 2005 Mitsubishi Endeavor XLS rear passenger door handle Remove inner door handle and arm rest if applicable, with a flat screw driver or chisel leaver door cover away so as to gain ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...