Question about 46462 Front Load Washer
...drain), remove filter and voila!). Found one sock, a quarter, and some other junk clogging the drain. Saved $55 house service call. Thanks all! Draining the water pump helped slove my F02 problem Did ...
...HE3 kenmore Elite drains slow or not at all. shows Code FO2 ok " there is a filter on that line ,it has to be cleaned to locate filter, follow hose back to filter filter will come apart for ...
Question about Elite 45986 Front Load Washer
...to get bottom panel off to get to the filter drain plug, i cant seem to find screws. any ideas?? theres three screws at the bottom,,of the bottom panel,,its easier with a torexs head ...
...the code and I replaced the pump and check the drain every 6 months or so. I was told a good indicator that the drain filter is getting clogged is when your washer has an odor. Just a rule of
Question about Elite 45986 Front Load Washer
...filter at the pump 2. check to see if you have any restrictions at the drain hose ( that is the hose that set in the hole in the drain) 3. clogged filters at the outlet pump will cause improper ...
...drain filter is likely clogged and needs cleaned. On the front lower panel of the washer, remove the screws and panel. You will see a drain filter (about the size of a tennis ball). Before removing ...
Question about Elite 45986 Front Load Washer
...drain pump filter, you can take out three torx screws from the bottom front panel and then clean the area completely, lift up the cap to clean the filter. If the error returns then check the drain ...
Question about 3.8 cu. ft. HE3 Front Load Washer
...filter screen on the drain pump is clogged with debris. this tip i have written will show ya how to clean the filter on the pump. ...
Question about 4.0 cu. ft. Steam Front-Load Washer, Metallic Gray
...drain! Clean out the filter and finally replaced the pump motor. Now it still comes up with the "OE" code. It won't sp in on the rinse cycle!Any thoughts? need help! It could be the contacts inside ...
Question about 4.0 cu. ft. Steam Front-Load Washer, Metallic Gray
drain You will need a few towels. There is a cartridge like filter located on the front lo2er left corner of all current front load washers for cl3aning purposes. Remove or open the access panel plate
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions