Question about 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140
chuck to tighten The chuck is held onto the drive shaft via screw located inside the chuck. The screw has reverse threads and sometimes the screw gets loose restrictinhg the chuck tightening. Turn the
Question about DC927KL Heavy Duty 18 Volt Cordless Hammerdrill
...chuck? This is the new drill (not DC988) with the Rohm chuck and it doesn't apear to have a retaining screw on the inside. Many thanks I want to remove the Rohm self tightening chuck from my new ...
Question about DC927KL Heavy Duty 18 Volt Cordless Hammerdrill
...drill #6425 chuck ring broken in half Skil 3/8 Hammer drill #6425 chuck tightening ring that would normal tighten with chuck key has broken in half. get a new chuck - thread is a 3/8-24 left hand ...
Question about DC927KL Heavy Duty 18 Volt Cordless Hammerdrill
...bit on makita 6343d i can not find key hole to tighten bit your must have a keyless chuck. hold the black center part of the chuck and run the drill forward or backward to open or close the
Question about DC927KL Heavy Duty 18 Volt Cordless Hammerdrill
...drill keeps loosening up one of two things is happening. 1. The chuck is worn out and needs to be replaced. 2. The chuck is not tight enough before you start drilling. If you have the style of chuck ...
...drill? The chuck will not turn. So to loosen just turn the black plastic counter clockwise. The chuck will loosen. Or you can hold the black part on the chuck tight and put the drill in reverse and ...
...drill. The chuck will open (unless it is broke) and release the bit. You do the opposite (slowing running the drill in forward) for tightening a bit in the chuck. Put the drill in reverse, grab the ...
Question about 14.4 volt Cordless Drill/Driver with Work Light
...drill variable speed reversible double insulated model # 315.101420 The chuck is open completely and I am unable to release it so I can tighten a bit. I can't turn the chuck key to tighten the chuck. ...
Question about 3/8" Corded Drill
...drill variable speed reversible double insulated model # 315.101420 The chuck is open completely and I am unable to release it so I can tighten a bit. I can't turn the chuck key to tighten the chuck ...
...drill chuck around a bit. 'make model (what it is)' as first three words of every question please. All the ways to tighten a drill chuck in the link. I have one with a key and my cordless drill has a ...
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions