Questions & Answers for: drive cycle 1996 jeep grand

...cycle and see if that fixes it. Usually ic problems are with the cluster...not the wiring or the vehicle side. OP sorry you are fixing a car you dont understand.
no engine stated, nor size or gas ...

Ad

...1996 Jeep Grand Cherokee Limited. Not sure what exactly the problem is. I have had the alternator and starter tested at autozone and they both test good. The problem I seem to be having is starting ...

Ad

...Jeep Grand Cherokee Water pump, radiator, theromstat replace in last 2 mo. When driving the temp runs around 220 then jumps to 260 (red) where it stays for 30s to 1 min and drops back down to 220. ...

1996 Jeep Grand Cherokee My 1996 Jeep Grand Cherokee stalls all of the time. I googled around to see possible causes and one that kept coming up is then eed to clean or replace the IAC valve. Where is

Question about 1996 Grand Cherokee

1 Answer

...cycle the key off to on,they won't find a current code if you pull over and turn the key off.May be you could let one of the mechanics drive it home 1 night and return it in the morning,that way he ...

...likely has not run through the "learning" cycle sufficiently to permit normal operation to resume. Generally takes a certain number of starts and re-starts as well as some drive time

Question about 1996 Grand Cherokee

2 Answers

wont idle but runs fine if giving gas do this. Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to

...a relay I just got a 1997 jeep grand Cherokee 318 v8 there is a buzzing sound under the dash board right side but whin I turn the blinker on it stop I need help this sound is gonna drive me crazy ...

dual climent control not working will not put out any heat i need troble shooting advice i don,t no were to start looking Try the code trick, turn your ignition on and off, but not to the point that ...

...cycle I have driven the Jeep over 384 miles and still incomplete. have you tried clearing the codes then driving ? have you checked for any wear/holes etc in the air intake side of fuel intake, as if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...