Questions & Answers for: drum top load kenmore washer

top. spin the drum around to remve the old baffles.how to i remove the top of the washer This advice from Sears to replace baffles only applies to dryers. The baffles for the washer are installed from

kenmore 80 series washer hi i happened to check my washer the other day. i saw the central agitator agitating, but the outer drum was stationary. I thought the outer drum should be moving in the ...

drum turns slow and makes a loud noise ''I HAVE A TOP LOAD KENMORE WASHER I PURCHASED IN 2001 THE WASHER TRYS TO SPIN AND MAKES A LOUD NOISE'' Check for a garment stuck between the tubs. Check the ...

Drum in kenmore top loaded washer is moving freely, loud in spin The drum seems to be moving freely side to side, and is hitting the sides of the washer even with a small load. Are there shocks that ...

...top load washer My Kenmore direct drive washer is leaking into the drum. I mean you can actually see the water drip into the drum. Could it be the inlet valve? Yes, very likely is a bad water inlet ...

...with my Kenmore 500. Tomorrow will be the second time a repair man has visited the house. Washer on 5 weeks old. Drum bangs every other load. Load not unbalanced. Avoid this washer, it is a

...drum on a kenmore series 80 washing machin I moved the washer for one home to another and the drum seems unbalanced while running now. Check to see if one of the springs supporting the drum has come ...

Kenmore top load washer. The drum won't turn and makes a grinding noise. The direct drive coupling between the motor and transmission needs replacing.

...top load washer. Tipping the washer over and looking underneath, I see grease has been spraying out of the holes in the nylon drum housing. Spots occur about every 3-4 loads. Are the bearings going ...

...top loading washer. Does aggitate in wash cycle, but wont spin in rinse. With drum empty, it will spin. Removed cloths, rung dry by hand and returned to drum. Still would not spin, but I could see a ...