Questions & Answers for: dw056

Ad

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

02-03-09 Tues. 9:30am CST Hi Tech Help I have a DeWalt 1/4" Cordless Impact Driver DW056. It seems to slip when the trigger is engaged when loosening fasteners. I think the driver started impacting ...

Ad

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

2 Answers

gear slipping in dewalt dw056 tore unit apart and the small pinion gear that goes directly on the motor shaft slips on the shaft. there doesn"t seem to be any splines or anything in particular holding

Ad

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

2 Answers

tired old Dewalt dw056 impact driver My Dewalt dw056 impact driver has been used a lot of hours. It seems to be tired. It runs fine for a few minutes then it loses power and finally won't go. Is there

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

my dw056 breaks bits can you change the hammer to a 1/4" or 3/8" hammer they look the same on the manual in order to make the 1/4" hex drive impact drive 1/4" or 3/8" sockets, you need a 1/4" hex ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

2 Answers

...is still running but the front where screw is not moving why is it doing that ? I have dc825 and dw056 The pinion on front of motor is slipping on motor shaft. It seems to be just a press fit. ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

...shaft. It seems to be just a press fit. Seems like a flaw in design. I had same problem. I took my dw056 apart and took pinion off motor and pressed groves into motor shaft with side cutter pliers. ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

My Dewalt DW056 doesn't run variable speed. It's either full speed or not at all. Can this be fixed? It can be fixed, you just need a new switch. I can not find a Dewalt model number DW056 so I'm not ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

my Dw056 impact is about 3 years old. its starting to die. it wont impact and its very weak. is there a repair for this to bring it back to life Hi, There is a repair in which you would have to have ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

can you change just the bushes on a dewalt dw056 No, the brushes are part of the motor and pinion, Dewalt part number 607990-03. If you search "dewalt 607990-03" you can find several on-line vendors ...

Question about DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

...the part # as There are other places that still have it. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Drills Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18154 Answers

john h

Level 3 Expert

22486 Answers

Are you a Drills Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...