Questions & Answers for: Yamaha DT 125 R electric starter generator

Question about 2004 DT 125 R

2 Answers

DT125 no electrics! non starter Hello, my DT125 was stolen, got it back couple of wires cut. Repaired wires put new batt on but get nothing when I turn the key in the ignition. No lights, no power at ...

Ad

...electric start (year 2004) look at the right side of the handle bars swithes, if you hve a starter there will be a starte button, also check under the carb or around the cylinder for a starter ...

Ad

Question about 2000 DT 125 R

2 Answers

...2, checking connections. Starters are much too simple to be more complicated than that, but the electrical system can be. Check the circuit between the relay and the starter. Is is a direct wire ...

...New cdi box. but same problem sounds like the stator coil in behind the flywheel there are some electric tests for the stator but not allways correct I would try a stator You need new generator ...

electric starter issue it is "IMPERATIVE" that you begin with a fully charged battery 12.5 volts or better and be able to pass a proper load test, and the usual suspects are: 1. Battery terminals have

Question about 2000 DT 125 R

0 Answer

...Yamaha DT 125 RE electric starter removal Yamaha DT125RE 2005 Service Manual OEM parts for Yamaha YAMAHA DT125R Owner ...

Question about 2003 DT 125 R

1 Answer

...DYNAMOS Yamaha DT 125 RE electric starter removal http://www.motogelnar.cz/manual/YAMAHA/DT125X_RE-05-Service_Manual.pdf OEM parts for Yamaha YAMAHA DT125R Owner Manual Maybe you need a new

...electric starter on a Yamaha DT125R Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice ...

...Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping. For more information about your issue and valuable "FREE" downloads that you will need please visit the ...

electric starter issue it is "IMPERATIVE" that you begin with a fully charged battery 12.5 volts or better and be able to pass a proper load test, and the usual suspects are: 1. Battery terminals have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...