...engine speed at idle. Check for an idle speed screw designed to keep the throttle plate from closing completely, and an idle mixture screw that limits the flow of fuel at idle. If your carburetor ...
...engine to die when it should be idling: the idle speed mixture adjustment, or low cylinder compression. Of course, if it was idling fine before, and the idle mixture adjustment hasn't been changed, ...
Question about Harley-Davidson Motorcycle Desktop Telephone
...1/4 turn. adjust engine idle to 900- 950 rpm. If engine smokes under accel drop needle down 1 notch, if seems weak or hesitates under load, raise needle one notch, refer to Harley manual for ...
Question about 16 In 4.5 Hp Electric Chainsaw With Carrying Case MCC4516FK
engine is at idle. As for the mixture screws the low speed screw (L) you adjust when the engine is at idle, the high speed screw (H) you adjust while the engine is running with a good bit of throttle.
Question about 16 In 4.5 Hp Electric Chainsaw With Carrying Case MCC4516FK
constant speed engine with no adjustement for idle or a variable speed engine with no adjustement screw for idle , then it needs a carburator overhaull . If not adjust the idle scew , engine hot
engine idle speed, using the tachometer needle, while the engine is running. Ideally, the engine should idle steadily at 1,250 rpm. 4 Adjust the engine idle speed to 1,250 rpm, using the idle adjuster
Question about 2002 RS 125
engine idle speed, using the tachometer needle, while the engine is running. Ideally, the engine should idle steadily at 1,250 rpm. 4 Adjust the engine idle speed to 1,250 rpm, using the idle adjuster
...engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars computer or ECM (electronic control module) receives information from various sensors and will ...
...idle speed is stable and that the engine responds well to throttle inputs. Fine-Tune if Necessary: If the idle speed is still not within the recommended range or if the engine response is not ...
...engine idles high, how can I adjust the idle speed. Its not really adjustable. The computer controls idle speed via the idle air control valve. You probably have a vac leak. You could override the ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions