Questions & Answers for: Buick LeSabre engine light is on

...engine light came on and found out plastic intake manifold was cracked. Replaced the intake and for a few days light was off. Then the same check engine light came back on. Car surges sometimes and ...

...Engine Light I have a 95 Buick LeSabre with 109,000 miles on it and lately when I start the car the engine light has been coming on. On the freeway the other day all of a sudden it lost alot of power ...

...engine light came on i have a 2001 buick lasabre and the check engine light just came on or i think it said service engine soon what does that mean meaning you need to change oil and filter in your ...

...wrong or the light wouldn't be on can you tell me what would cause this kaltery My service engine light is on and I was told the 02 sensor is bad. replace the 02 sensor and the light will go

engine light is on and I was told the 02 sensor is bad. My service engine soon light is also on, but goes off when I start the car. However, when the car is started, sometimes it starts rough and puts

engine light comes on! will not idle, but when CE light comes on, motor seems to return to normal. Scan shows TPs sensor, but when replaced, there was no change. I saw exact same problem for few days.

...light comes on. hello, you may need to have engine tuned up, have choke checked out, usually all the lights,bells and whistles will come on after it dies.because you are having to start engine again, ...

...engine light on most vechiles or is it just a friendly reminder for something? Yes it is you need to take that to GM fast! That usually means, whoever changed the oil last failed to clear the service ...

engine light is on and had code checked and it is P0171 lean fuel. I have replaced air and fuel filters and PCV. With each part replaced I disconnected the battery as a way turn off the service engine

Engine light won't go off for check engine. Shows 2 engine light Fuses has been changed but light won't go out 1. What is "2 engine light"? 2. Have you had the code read to determine if this is a ...