Questions & Answers for: Dodge Ram 2500 engine light comes on

...engine light coming on also engine cuts off. The tech replaced ECM unit. But, tech stated there are no codes showing the engine is shutting off. I am having issues with the engine shutting off while ...

...engine light just came on was driving for about three hrs and chk engne light popped on nothing changed performance wise Hi, The engine light can come on when a fault occurs, Or it gives the ...

engine light comes on. Unit will work after turning the ignition off and restarting (like the next morning), but the engine light remains on until dealer resets it. Sounds like a common problem, but I

...engine light 03 Dodge Ram 1500 4.7ltr, P0307 code, check engine light comes and goes, i know it's a misfire on the #7, tried a new coil pack, new plugs a few months back and the light is back on and ...

...engine preheater light wouldn't come on. Headlights work. all of that stuff you describe is controlled by the PCM(powertrain control module) on the firewall passenger side. mine got shorted by an ...

...engine light comes 2004 Dodge Ram Diesel. Check engine light comes on intermittently. Within 30 seconds after it comes on the engine usually hesitates, like someone hit the brake for a split second. ...

...engine light is on and won't go offf, why? The check engine light comes on when the ECU or the cars computer sees a fault with one or more of the engine management sensors or circuits. The ECU will ...

...engine's started, then oil gauge falls below zero and warning light comes on saying "Check gauges," so I check the oil and transmission fluid levels and these are fine but the warning light ...

...engine light on and has no power could it be the fuel filter When your check engine light comes on. It will put your truck into a safety mode, so you dont burn up your engine and transmission, in ...

...ENGINE light and other indicator lights would come on when the key was turned to the run position and the engine would crank and start when the key was turned to the start position. Now when the key ...