Questions & Answers for: Dodge Grand Caravan engine malfunction

Question about 2007 Grand Caravan SXT Minivan

2 Answers

malfunction indicator light for the onboard diagnostic system or OBD. Today when I was driving it popped on. No other indication that anything was wrong. A few hours later when I started my car again,

Ad

...on, it is shaped like an engine. This is a 2006 Dodge Grand Caravan. I have checked everything what next. Get the OBD11 codes with a scanner. That is the MIL codes. Malfunction Indicator Light. ...

Ad

engine miss fire 2000 caravan 3.8L EVERYTHING has been replaced on ignition side The only thing left that I can think of then, is a malfunctioning fuel injector.

Question about 2004 Grand Caravan

1 Answer

PO441 engine code this means your evap purge flow monitor is malfunctioning insufficient or excessive vapor flow detected during evaporative emission system operation it has to do with your fuel ...

Question about 2007 Grand Caravan SXT Minivan

1 Answer

Engine light on for malfunction. Through engine analyzer displays light on due to vacuum loss. Is this IMP and can I still drive the van? check the oil and water and if levels ok then you can drive it

Question about 2007 Grand Caravan SXT Minivan

1 Answer

apprears its the EGR, but there are 4 codes that dont expalin anything? any idea? What are the codes, the codes are there for a reason. The on board engine management system has detected a malfunction

Question about 2002 Grand Caravan

2 Answers

...Malfunction Symptoms - Engine Light ON (or Service Engine Soon Warning Light) - Driveability problems - Transaxle shifting problems Possible causes - Shorted or open circuit within transmission ...

...engine malfunction light are illuminated. Engine malfunction light is not blinking, but when i start the car, all the gauges go to full and then back down. Also, while driving back to the house, it ...

...malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected ...

...P0734? won't catch gears and engine light comes on P0700 transmission control system malfunction (failure) P0732 gear 2 incorrect ratio P0734 gear 4 incorrect ratio Check level and conditions of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...