Questions & Answers for: Hyundai Santa Fe engine malfunction

...malfunction indicator light stays on. was told I needed su5541 temp sensor, but can't find where it is supposed to go. wants to keep stalling. Depending on which engine you have (4 cylinder or V6), ...

Ad

Question about 2004 Santa Fe

1 Answer

Check Engine Code PO446 What is the cause/correction for an Evap System Vent Malfunction purge control valve sticking either open or closed. location depends on what engine you have

Ad

...Engine light came on. Handbook says "there is a malfunction of an exhaust gas related component", but says nothing else except to take to your Hyundai dealer. Time and money is tight, is there ...

Question about 2003 Santa Fe

1 Answer

...engine light' (MIL=Malfunction Indicator Lamp) is turned on, there is a DTC (Diagnostic Trouble Code) set/stored in the ECM/PCM (Engine Control Module/Powertrain Control Module). This code ...

Question about 2003 Santa Fe

1 Answer

...engine 2WD Thanks The code 1701 means: TPS signal to TCM malfunction. TPS=Throttle Position Sensor. TCM means=Transmission Control Module. The engine shake requires further diagnosing. Best advice is ...

...engine light' (MIL=Malfunction Indicator Lamp) is turned on, there is a DTC (Diagnostic Trouble Code) set/stored in the ECM/PCM (Engine Control Module/Powertrain Control Module). This code ...

Question about 2004 Santa Fe

1 Answer

...engine light' (MIL=Malfunction Indicator Lamp) is turned on, there is a DTC (Diagnostic Trouble Code) set/stored in the ECM/PCM (Engine Control Module/Powertrain Control Module). This code ...

Question about 2003 Santa Fe

1 Answer

...engine light' (MIL=Malfunction Indicator Lamp) is turned on, there is a DTC (Diagnostic Trouble Code) set/stored in the ECM/PCM (Engine Control Module/Powertrain Control Module). This code ...

engine speed (RPM ) sensor---circuit malfunction====causes ---wiring---CKP/RPM sensor ---ECM code p 0340 refers to camshaft position sensor (CMP) sensor A bank 1---circuit malfunction===causes wiring-

...malfunction battery/brake light on . monitored battery voltage when this occcurs being ~15volts. Battery voltage is high, suspect alternator over charging and affecting the monitor. Connect an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...