...engine misfire code works on picking up the changes in the engines detenation and if any of your engines sensors were faulty the these codes would also show up no other codes recorded good news ...
...engine light was flashing and the code says there is a misfire in cylinder 3, 6 and multiple misfires. The plugs and wires were changed in April of this year. Any suggestions on what could be causing ...
...engine light came on a couple of days ago, and it began to idle very rough at stops. had the codes pulled from autozone. dont remember the numbers, but one was that there was a misfire in 4 and the ...
...misfire would this be ignition coils and where is #1 Here are some commons causes, hope this helps. Air leak in the intake manifold, or in the EGR or EVAP system Base engine mechanical fault that ...
Multiple cylinder misfires 2001 Dodge Intrepid I got a dodge intrepid 2001 with a 2.7L engine. While it was running, the check engine light came on. When I put it on the tester, It said that there was
1999 Dodge Intrepid, intermintently misfires, runs 1999 Dodge Intrepid, 3.2l engine intermintently misfires, runs rough, loses power and engine light comes on (multiple misfires). Operation returns to
...the engine has a miss and I get P300, P306 and P356. I have no Ideal what to check. p300 means multiple cylinder misfire,p306 means #6 cylinder misfire, and p356 means ignition coil ...
...misfire in a dodge engine? There are many things that can cause this misfire, this may be due to a vacuum leak or weak fuel pressure or bad sparkplugs or wires or if used in this engine instead of ...
...Engine Misfire codes for car? ...
P032 and P0462 code on a 2002 dodge intrepid I have a 2002 Dodge Intrepid SE with a 3.5L engine and the check engine light came on. I plugged an OBD11 scanner and came up with P032 and P0462. I ...
Usually answered in minutes!
1,166 Questions
867 Questions
924 Questions
766 Questions
627 Questions
