Questions & Answers for: Cadillac DeVille engine timing

Question about 1991 DeVille

1 Answer

timing The decal in engine department is defaced, I need to know how to correctly set the timing on a 1991 4.9 engine. why do you want to set the timing

Ad

...same time. Car not starting. I replaced the battery and starter and also spun flywheel to make sure engine was not locked. Solenoid is ground to the engine. Attempted to jump the starter directly by ...

Ad

Question about 1996 DeVille

2 Answers

How should i wash off my engine? I have a northstar engine. How should i wash it off? Spray on oven cleaner is great for cutting through the oil. Just be careful not to remove paint with it. Fantastic

Question about 1998 DeVille

1 Answer

timing after engine overhaul the engine size is 4.6 thanks The timing mark on the crankshaft sprocket should be at the 12 O'clock position.....the timing mark on the intermediate sprocket should be at

...Engine Timing specifications and adjustment procedure for each engine are listed on the underhood Vehicle Emissions Control Information (VECI) label in the engine compartment. Use specifications or ...

engine uses chain driven cams that eliminates the need to replace timing belts. Thank you and enjoy, Lee The average replacement interval for a timing belt is approximately 60,000 miles (96,000km). If

...timing procedure on the northstar engine, the engine control module uses information from various sensors and adjusts the timing for the present conditions. There are 3 spark curves in the module to ...

...engine and aim the timing light the timing mark loosen the distributor hold-down nut. While observing the timing mark, rotate distributor untill the line indicates the correct timing .This sets the ...

i need to reset check engine dash light in 2004 deville. dealer has told me what is going on and i choose not to repair at this time. how do i make the check engine light in dash If the check engine ...

engine grossly out of time suggests the possibility of a timing chain or the cam sprocket are so badly worn that the engine has "jumped time". I'm sorry but given the minimal info available that's all

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...