Questions & Answers for: enough water front load washer

...enough LG water inlet valves are favorite for that problem. if you put the power off and the water still flows into the tub then the valve needs to be serviced. if it goes off when power is switched ...

enough to get rid of the water. How can I speed up the spin? The heavy jacket prevented the washer from spinning at a rapid pace, so I added a heavy bathrobe to absorb some of the water and to balance

...much water or not enough. This means the water didn't drain out within a 10 minute time period. Check pump trap for debris and clean out. Check drain hose. Check for pump operation during drain ...

...ENOUGH WATER. IT SEEMS LIKE IT WASHER VERY DRY AND MY CLOTHES SMELLS HUMID. PLEASE HELP may be it has asmall problem try to clean the inlet water filter only by teeth brush under tap water thank ...

water level high enough to wash off all the gunk that has built up between the spinning inner barrel of the washer and the outer barrel in which it sits. For future reference... only use HE detergent,

enough water in the tub. When the tub is full, there is only about an inch of water at the bottom of the tub. I only use HE detergent. Please can someone help me....I am tired of my clothes coming out

...enough water to thoroughly clean the clothes. The sales store had to replace the washer with another brand. There is an ongoing class action lawsuit against Lg for this problem. Do an online Search ...

enough rinse water. Remove the hoses from the back i=of the machine, pull out screens, cold water is blue tab inside connection on washer, hot water is red. Clean screens and insert them back into the

...enough water to bring it down to the load of clothes. Also, my fabric softner does not emplty out either. This is only for the prewash side. My larger side disloves every time on both detergent and ...

...an error code of IE front load washier model: WM2016CW how do i fix this problem. Not enough water getting in your machine make sure your inlet hose isn’t kinked or the water pressure hasn’t