...service menu off your TV, then on the remote enter - [DISP], [5], [VOL+], [PWR ON] This will give you the service menu To scroll up use [1] To scroll down use [4] To exit press Power I need the ...
...enter the service mode. then you will need to readjust the convergence. A light green outline is called "blooming" --- caused by weak green CRT...take lower,front cover off,locate screen/focus adjust ...
...enter service menu Service menu for any sony will be by pressing and releasing the next keys: Display, 5, Vol+, them power on. The TV must be off while you do This, be carefull to change some values, ...
...enter the service menu by using the remote. Press DISPLAY, 5, VOL+, POWER in rapid succession. Once the screen appears, you should notice green letters and numbers at the top of the screen. Your ...
...Enter Service Mode 1. Turn on the main power switch to place this set in standby mode. (LED will light in red.) 2. Press the buttons on the commander as follows, and enter service mode. PRESS these ...
Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV
...enter the DE Service menu. The TV screen will display the total lamp time hours.Reset the lamp time by pressing channel 3, then mute, then enter. This will put your lamp counter back to 0. hope it ...
...service mode menu, Press the number 8 key and then hit enter, this will set the unit back to factory specs. The set should turn off itself and then power on itself to channel 3, All user setting ...
Question about Grand WEGA KDF-55XS955 55" Rear Projection HDTV
enter the DE Service menu. The TV screen will display the total lamp time hours. Step 3 Reset the lamp time by pressing channel 3, then mute, then enter. This will put your lamp counter back to 0.good
...service menu i adjusted the lamp settings since doing this i cannot get the set to turn on , i get the dreaded standby light flashing 3 times then lamp indicator will stay lit with the stdby light ...
...enter the DE service menu. Your tv will display the total lamp hours. Reset the lamp time by pressing channel 3, then mute, then enter. this will make your lamp hour timer to zero. Good day and best ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions