Questions & Answers for: error hf

Question about Elite 45986 Front Load Washer

1 Answer

HF error code, door will not open This code means its not getting a sufficient water supply. I was doing a cold wash and noticed it was sucking down some hot water, so shut off the hot. MISTAKE, after

Ad

Question about Elite 45986 Front Load Washer

1 Answer

...error msg"out of frequency". on connecting monitor with other pc having win vista it works fine. i cant even open my bios. HF 27.9khz vF 62.0hz operating frequency HF 30 -54khz vF 50 -120 hz 15"LG ...

Ad

...error message: Out of Range, when I turn on the computer. The Current Freq is Hf = 91.1 khz, Vf=85 hz. The correct range for Hf is 30-80 Khz, and for Vf 55-75 Hz. get the monitor that you used ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...HF error. It is in the cold Possible causes for HF error. It is in the cold water inlet as the clothes are hot even after the rinse cycle. The cold water flows to the machine but obviously is not ...

Question about Elite 45986 Front Load Washer

1 Answer

...HF error is displayed when the control detects no water entering the machine. To clear this error press and hold the PAUSE/CANCEL button twice. You can then check if the water inlet valve is fine and ...

HF error 68 and wont connect. I've tried reconnecti i have a kenwood kdc u546bt and have had for a while. It has always connected to my iphone for bluetooth but for the past month has been reading

Question about 3.8 cu. ft. HE4t Front Load Washer

1 Answer

...hf error stands for hot water not being detected, make sure both hot and cold water are open and not reversed. if unit overfilled and flooded garage, the is if with you pressure switch or pressure ...

Question about 3.8 cu. ft. HE4t Front Load Washer

1 Answer

kenmore front load wash 42936 my washer machine stops and it has a beeping noise and a HF sign shows up beeping noise and a HF sign shows up kenmore front load washer he4t error code FH

Question about 3.8 cu. ft. HE4t Front Load Washer

1 Answer

...hf error The hf error comes on during the wash cycle and stops the machine. I have checked all of the known problems with this error, ie, cycle test, valve operation, flow meter, clean drain, and ...

...HF Flame present with gas valve "OFF" error If flame is sensed with the gas valve off the control will go into lockout. The blower will run until error condition is corrected. When corrected, control ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...