...valve. EVAP canister or fuel tank leaks EVAP purge line (pipe and rubber tube) leaks EVAP purge line rubber tube bent Blocked or bent rubber tube to EVAP control system pressure sensor Loose or ...
...EVAP vent valve hose connection. Remove the hose from the EVAP canister vent valve. Remove the EVAP canister vent valve by placing a pry bar between the valve and mounting surface, and moving the ...
...Valve P1446 EVAP Canister Vent Valve Circuit P1447 EVAP Canister Purge Flow/Volume Control Valve Circuit P1448 EVAP Vent Control Valve Circuit P1490 EVAP Vent Control Valve/Bypass Valve Circuit P1491 ...
...valve. The EVAP control system pressure sensor can now monitor the pressure inside the fuel tank. If pressure increases, the Engine Control Module (ECM) will check for leaks in the line between the ...
...EVAP vent valve is likely stuck closed. The valve is under the car near the fuel tank. Remove the valve and check to see if it's stuck. You may be able to restore operation by cleaning the valve ...
valve) (9D661) EVAP return tube (EVAP canister purge valve to intake manifold) (9G271) EVAP canister purge valve (9C915) Vacuum source line (input port vacuum to intake manifold) Harness circuits: CV,
Question about 67680 Evaporative Cooler Air Conditioner
...valve, EVAP cut valve/pressure sensor, hose leak/blockage, ECM P0455 - NissanTypePowertrain - Auxiliary Emission Controls - ISO/SAE ControlledDescriptionEvaporative emission (EVAP) canister purge ...
Question about 67680 Evaporative Cooler Air Conditioner
...valve - EVAP Water separator - EVAP canister is saturated with water - Faulty EVAP canister vent control valve P1446 Nissan EVAP Canister Vent Control Valve Close Evaporative emission canister vent ...
...EVAP canister purge valve tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service. Disconnect the chassis EVAP vapor line from the EVAP canister purge valve. Refer to ...
Question about 2009 HHR
...canister purge valve. Disconnect the vacuum supply hose from the EVAP canister purge valve. Remove the EVAP canister purge valve bolt. Remove the EVAP canister purge valve from the intake
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
