Questions & Answers for: exit jam

jam after the second page. Any help would be appreciated. You need to change the paper type when using card stock, plain etc. As for the paper jams; you need to check the exit sensor at the exit door,

...jam. Exit jams are frequently caused by exit sensors. These sensors are typically mounted on the fuser assembly or adjacent to it. They are plastic arms that block and unblock an optical sensor. The ...

...jam' , once turned off ad on is disappers but next print is still jammed halfway Hi, your printer exit sensor is faulty. replace the exit sensor will resolved this issue. Yes, bad exit sensor. Go to ...

...JAM. NO PAPER JAMMED. WILL NOT CLEAR The problem is normally on the exit sensor.Please check the exit sensor if its in the right possition.If the exit sensor is in the right position,also check the ...

...jam at the exit. the exit sensor is faulty it got to replace. if it got jam in the printer. the transfer belt or fuser is faulty. both got to replace if it got jam before pickup. pickup roller got to ...

...does the exit switch stick up in the back of the fuser into the paper path? I've had to replace lots of the exit sensor flags because the top half was broken off while clearing a paper

...• Faulty system card Action • Check for anything in the paper path that might cause the paper to jam. • Load paper in the manual feed slot. • The fuser exit sensor may not be functioning

having a paper jam about every 3 or 4 print jobs. it jams just before it exits. is this the paper exit sensor? Its the fuser exit sensor most likely.

...jam in exit area" every time i print even though i always put out the jammed paper in the exit area. every time i print using my samsung scx-4623f it always paper jammed in exit area. though i always ...

...jam fault on final exit slot? The Cannon I sensys mf4550d printer prints the full page but indicates a paper jam after printing 1 page. It clears after opening the bottom cartridge flap you can hear ...