Questions & Answers for: Volkswagen factory alarm Cars & Trucks

FACTORY ALARM GO OFF AFTER 20 MIN Why would you add another alarm?? I recommend you remove the aftermarket alarm, it is the cause of the issue, there is no fix, the factory alarm can't be disconnected

factory alarm when i turn the light on alarm is on, when light stay off alarm is off dealer only I have a 2000 Jetta and using the key to gain entry to the vehicle, the factory alarm does not ...

...factory fitted alarm, mechanic attempted to disconnect entire alarm but failed, can alarm be disconnected and maintain central locking? I've had the same problem be fore on 99.5 jetta most likely one ...

alarm system from the factory i have been working on one in my shop. the alarm moddule is inside the dash behind the light switch and has a 10 pin connector and a 6 pin connector. this can be bypassed

...factory alarm the only way is to lock/unlock doors(with key) unless some one knows how to disable the alarm altogether. if alarm is not factory just find the box and remove alarm system (you may need ...

...alarm should stop (this will apply to factory alarms ). if you have an after market alarm you should use the control box. If battery is low or bad you must replace it before you can shut off the ...

...hooter sound but now it does not anymore nor does the it sound when the alarms goes off. What can be the problem Citi Golf 2006 1.4i factory fitted alarm system where it shoud be the alarm in vw ...

Factory alarm I totally disconnected alarm at the module/cpu. Recently bought new battery, hooked it up and alarm went off, alarm horn and lights flashed, door key switch shut it down eventually, ...

factory alarm for 2001 cabrio, is it part of the radio? No, it is not part of the radio unit proper. I have been driving my car since it was 3 days old without the factory radio. I could not tell you ...

...factory alarm .which wires do I cut and join Hi. the factory alarm should not cause the car to not start. There will be an isuue with the key code or TCI ignition module. These need to be programmed ...