...reset itself to the factory setting of 15 pictures. I have a 2.0 GB memory card and I can not remember the steps to allow the camera to take the additional photos that the memory card allows. If ...
...reset to factory settingsand chl if dat wrks....else most prob there is a prob in the temp sensor which can be handled only by the company people my camera blinks red then turns off, the set time ...
...IN PICTURE I HAVE A KODAK 10X CAMERA. WHEN I TAKE A PICTURE IS HAS LINES IN IT take pictures on different settings, then check, also check if there is any default factory setting, if its there reset ...
...a green tint. Changed ink cartridges, rebooted and calibrated printer. Used different computer running Vista. Same issue no matter what. Appears to be a printer issue. Try to factory reset the ...
Question about Easyshare Z812-IS Digital Zoom Digital Camera
Zoom 8.2 Megapixel, 12x Optical have you tried a factory reset? or try doing a firmware update, could be the firmwares got corrupted, or have you done a firmware update and it did not update properly
...factory defaults. Reset Startup Application - Resets camera to startup mode to allow KODAK Software download. ...
Question about EasyShare MD41 Digital Camera
...20 secs and release reinsert battery and try powering on this would reset the camera to original factory settings at a hardware level (i got my other Kodak c340 to work this way) hope this helps ...
...reset to factory defaults or reset to defaults, this will reset the camera to the original settings. But then I see the Flash is the issue on the camera and it is possible that resetting the camera ...
Question about Genuine Easyshare C1450 Lens And Ccd Parts Repair
...factory reset trick. It fixes approximately 40% of all error messages on the KODAK EASY SHARE CAMERAS. But of course, no one is gonna be kind enough to help somebody out, they just want to take your ...
Question about EasyShare Z700 Digital Camera
...then in the camera. Sometimes a corrupted SD can't be read by the camera beforehand. If that doesn't work and you cannot format any SD cards try a factory default reset from the camera's menu
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions