Questions & Answers for: failed open printer

printer: - Machine off - Front cover OPEN - Switch on the machine while holding down the ?GO? button - Check that the TONER/DRUM/PAPER leds are lighted - Release the ?GO? button and check that all the

printer cover is open, but is closed please help Check every possible open "door" in the printer. Be certain that the cartridges are installed correctly. Check for even a small jam. If all else fails,

...open error Close front cover. 1300 Paper jam error Remove jammed paper, and press RESUME button. 1401 Head ID error Replace print head, as it has failed. 1403 Head temperature sensor rank error ...

...failed to solve this -Open the printer access door of your printer -Unplug power cable -then after 30secs plug the power able back -If the printer is already power-up the message printer access door ...

...failed. i went on brother website and updated drivers and still same message appeared when i try to print Try downoading the drivers from the apple web site. You would need the brother 1.1 drivers ...

FAILED SOME DRIVER PROBLEM please check the printer connection to your pc .... open printer and faxes check your printer status ..( it should be ready ) and cancel all the document are in pending ....

...Failed: Unable to open the printer connection. Please check your printer connections and check for printer errors... But when I print a test page from my computer it works perfectly! I'm confused ...

...has failed, carrier cable is disconnected or is already damage, print head temperature detection circuit has failed. Having said this, it is better to have the printer check by a qualified

...failed" (3807) Open the printer access door. Remove and install the printhead two times. Close the printer access door. Wait until the printer is ready to use. ...

AFTER PUTTING IN A NEW CARTRIDGE THE PRINTER ALIGNMENT FAILED. HOW DO I FIX IT Go to control Panel and Open Printer and Faxes Open Printers Toolbax and Click Utility and RE ALLIGN CARTRIDGES