Questions & Answers for: failing dmd chip

Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

1 Answer

...in the next couple months. If there are only a couple small white spots that never go away it could be a mirror that is seized on the chip, but it's far more likely that the DMD board is going

Ad

Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

1 Answer

samsung hl-r7178w has green video and vert. lines on all analog inputs, hdmi input is good and menu screen is good Hi,sounds like It could be the DMD board.This is how the DMD board works: ...

Ad

Question about HLR5067WX 50" Rear Projection HDTV

1 Answer

discount-merchant.com/SAMSUNG-BP41-00119E-p/1171034.htm?Click=48173 Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed one

Question about HL-R7178W 71" HDTV

1 Answer

...black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed

failing DMD chip in this tv and DMD board need to be replaced. Local tv repairman will do this job because it is not user level repair. Thanks. Buy a new DMD Chip and replace it yourself only cost you

...DMD chip as per the factory instructions. The cost ends up half price and the TV looks better than when you first bought it due to the new and improved DMD chip. This has especially been an effective ...

...found the OEM chips for as low as $9.00/ea. White dots are a failing DLP/DMD chip period. It is often brought on by excessive heat, most likely from poor ventilation or dust build up in you fan

...DMD chip with tiny white dots? When the projector is turned on,the projection which is shown on the whatever surface, there are a great number of dots which are seen in the projection and the number ...

...DMD chip is failing, the only fix is to replace the chip. Also if you do replace the chip make sure you use decent thermal paste between the chip and heat sink, and clean all the dust out, especially ...

Question about K11 Projector

1 Answer

...DMD chip on my Mitsubishi wd-82740. When I turned the tv on - the picture was about an inch @ 1/2 too far up and about an inch to the right and the picture appeared to be slightly zoomed. My question ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...