...Fan Belt Noise The fan belts of my Mazda have been replaced, but now there is a noise when the car starts, this noise stops when engine has been running for about one minute. no lights come up on the ...
...fan belt that connect the alternator and water pump. Then my car overheated and i replaced the belt but my car will not start. Any thoughts. Does it turn over, but not start? How far did you drive it ...
need to find out the path for a fan belt on a mazda there are 2 belts, you cant possilbly get them on wrong.
...fan belt slipping (not timing belt). To adjust the fan belt you need to undo your bolt on the alternator, pull it tight onto the fan belt and while holding it tight do the bolt back up tightly. this ...
...have new belts on alternator and fan belt jumps then has trouble going simple thing to do pop to your local kwik fit i think they do free battery checks that will determin if the batterys at
Fan belt needs tightening I'm guessing. If it's the same as my sister's 2002, there are two belts. The tensioner for the outer belt is on the front, under the power steering pump or ac compressor(cant
...fan.Fit new belt. Slide alternator foward untill their is around 10-15 mm deflection in the belt, and tighten alternator mount bolts again to secure belt and tension. Recheck tension after about ...
...belt drives all your components, including the alternator (the reason for your battery light coming on) and also drives your fan and water pump (reason for overheating). So other than moving the car ...
belt, fan belt, engine belt routing diagrams for all types of car models? Click the link below: ---- http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html ----------This
...fan belt replaced but engine still squeals? Possible that the fan belt is not tensioned right or that the water pump is binding causing low flow through the heater. If belt is not loose, release it ...
Usually answered in minutes!
549 Questions
373 Questions
369 Questions
284 Questions
255 Questions