...delivery motor is driven for 3 sec. Main problem The stack delivery motor is faulty. The delivery belt home position motor is faulty. Try to check motor & sensor or operate copier without
...belt motor is faulty. The knurled belt home position sensor is faulty. Condition 0001 The knurled belt motor does not return to home position when the knurled belt motor is driven for 1 sec or more. ...
...sensor (PI18) is faulty. The tray B lower limit sensor (PI24) is faulty. The tray B paper sensor (PI17) is faulty. Main cause The tray B lift motor (M12) is faulty. The tray B idle rotation sensor ...
...belt is not detected within a specific period of time . The ITB HP sensor is faulty. Turn off the main power, and check the DC controller PCB and the ITB HP sensor; then, turn on the main power. 01xx ...
...faulty. The Intermideate Transfer Belt is soiled. I believe depending on how many copies the black drum has, it may be bad. They are warrantied for 40,000 copies. This should get you in the right ...
...belt teeth) b. Faulty linear encoder sensor ( soiled or flawed linear encoder, or improper mounting position / tension ) c. Soiled carriage rail ( unlock the purge unit and move it by hand) * Never ...
...faulty ITB cleaning unit can soil the ITB Belt enought to where the home posistion sensor cant read correctly. Also the sensor itself could have gone out but ive only seen a bad sensor once.Check ...
...faulty. Open the Right Door Assembly and the OHP Sensor (with a blue tinted lens) is located on the machine side in the center below the registration roller and the ITB. Ensure that the sensor is ...
...faulty. Open the Right Door Assembly and the OHP Sensor (with a blue tinted lens) is located on the machine side in the center below the registration roller and the ITB. Ensure that the sensor is ...
Question about imageRUNNER iR C2880 Color Copier
Faulty fixing belt unit -> replace the fixing belt unit A-2. Faulty fixing belt displacement control drive -> replace the displacement control drive assembly B. In case that both sensors are not
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions