seat belt receiver (the female part). There is a switch inside of the receiver that needs to close to ground when the seat belt male part is inserted. You can either replace the seat belt receiver, OR
seat belt does not move when i opn the door i have a 1990 toyota camry and the seat belt does not move when i open the door i change fuse,sensor, switch and everything that have to do with seat belt ...
...seat belt harness does not retract properly?? Here is the Scenario: When sitting in the drivers seat with the seat belt harness in its secure mode (against chest) works normal. Once stopped and ...
...seat belt do not work 1989 Toyota Camery 4 door 4 cylinder. Windows wont go down (window lock is not on) and the drivers side auto seat belt doesnt work(passenger side works) I dont have a fuse ...
...seat belt on the passenger side stopped retracting, it also is not tight. I would appreciate any suggestions. Thanks. Annette By law it must be replaced, faulty mechanisms are not allowed to be ...
...seat belt buckles Dirty contacts on seat belt connectors (under seats) Dirty contacts on driver and passenger sides weight sensors (under seat) Seat covers Weight on passenger seat (Example: grocery ...
seat belt but older types need a fixing ,if it wants its own fixings then use the vehicles existing seat belt anchorage and bolt in to these but leave the seat belts connected or its a offence and you
...seat belt light is on when i have the seat belt on in toyota camry 1995 sensor may be stuck inside your seatbelt. spray a lube inside it and put it together and take it apart 5 or 6 times just to get ...
seat belt light stay on even after belt is fastened, drivers seat bad sensor change belt reciever end
...seat belt? The seat belt is worn out and have loose thread which makes it thicker and not able to release or pull out. un do the bolts that hold the seat belt rewinder take out the back seat and then ...
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions