Printing envelopes I have to manually feed envelopes into my Optra T610. Is there anyway to have those envelopes feed through automatically? you can replace the paper in the main tray with the ...
...Custom Enter the custom envelope size Pick #4 feed method click OK Set the feed tray to hold the envelope along the right side. Insert the envelope with the flap up - push it all the way in. Print ...
Open the manual feed tray door (that is the door on the front that has the "Brother" logo on it. Narrow the feed tray guides to filt your envelope. Envelopes feed it with flap side up and to the left
...feed tray. Envelope does load and prints corrctly just the bang with each envelope feeding in to it. That sound is actually the printer sucking the air out of the envelope to flatten it out. It is ...
...feed. Blank paper stands upright in a top-feeding printer and lays in a tray on a bottom-feeding printer. 3.Load your envelope in portrait mode for envelopes that are 8.5 inches wide (standard paper ...
Question about PIXMA iP5000 InkJet Photo Printer
...feed and print an 6 x 9 envelope Print 4" x 6" photo images in normal mode in about 60 seconds; up to 17 ppm ... 3/4 Envelope. 9 Envelope. A4. A5. B5 Envelope. C5 Envelope. DL Envelope. 6 3/4 ... ...
Question about Photosmart C4580 All-in-One - InkJet Printer
...envelope centered in the feed tray. However, since the width of the envelope is less than that of a sheet of paper, I need to use the paper feed guide which pushes the envelope to the right of the ...
...envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go. ? Put the paper into the manual feed ...
feeding envelopes Envelopes get jammed in the feeding tray Envelopes have always been a problem with the Riso feed mechanisms. Most envelopes have an imperceptible coating on them to allow them to ...
Question about Pixma MX452
...envelope it is 3x the thickness. feed it from the rear of the printer (manual feed) so it has its straightest path and does not have to curl around the rollers. make sure you feed it into the correct ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions