...feeder cover. It is already closed. I have never used the document feeder ever. Could the sensor for the document feeder cover be burned out or broken? I can print but I can't make copies. Is there ...
Question about OfficeJet 7310 All-In-One InkJet Printer
...feeder cover Hi jaiku, Thanks for replying to my problem about the document feeder cover (sensor probaby broken or burned out). Where is the wire to disconnect the document feeder? Is there only one ...
Question about PIXMA MX320 Color USB InkJet Printer
It says "close feeder cover" and have alarm light It says "close feeder cover" and have alarm light on my printer, please tell me what shoud I do and where is located "feeder cover?
...cover.If paper remains near the sheet feeder, press the paper feed roller lever inside the paper feeder to release the jammed paper, then carefully pull it out.Load the paper correctly.Press the stop ...
Question about RADF-11 REVERSING AUTO-DOCUMENT FEEDER Copier
...cover that is going to line up with a hole in the feeder when it closes, this is normally where the switch is. If you have a multimeter and know how to use it you can ohm out the switch to make sure ...
Question about RADF-11 REVERSING AUTO-DOCUMENT FEEDER Copier
...Feeder Cover. 4. From under the roller to the Feeder Cover side, remove the jammed page. 5. If a document is not jammed, check the document feed area if there's foreign material. If there's any, ...
...feeder cover (1).This provides easy access to the rollers (2) and separator pad (3), as shown below.1 Automatic document feeder cover2 Rollers3 Separator pad3. Lightly dampen a clean lint-free cloth ...
Question about DR-9080C Path-Through Scanner
...to the pick rollers? Check the plastic lever that is attached to the upper feeder cover. Make sure the upper cover is closed properly Verify that the dark colored sensor is clean in the feeding ...
...feeder unit are aligned with the triangle marks (B) on the machine. 6. Close the front cover. Close the front cover gently holding the handle. CAUTION Be careful not to get your fingers caught. 7. ...
Question about DR-9080C Path-Through Scanner
...feeder to turn is when the nailer is missing a protective cover. Usually covers in this area of the nail gun keeps debris out of the feeder area and prevents the feeder from popping out if place. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
