...oil filling places The sportster only has two oil fills. The engine oil fill is through the dip stick hole I use mobile 1 15-50. The primary fill is the upper access plate on the primary cover I use ...
oil light keeps saying too much oil wjat should I do? Hi! Did you fill the oil lately yourself?? Maybe you have filled extra oil... If not then the oil filter is blocked , not allowing oil to flow ...
coolant leak front under oil fill cover s engine coolant leak front under oil fill cover 2004 trailblazer OK, 4.3 V6 ? Coolant leak is coming from under the oil fill cover ? , do you mean the oil fill
...lines. If replacing the oil filter fill it up and lightly oil the o ring ,and do up tight by hand.Filling the oil filter will stop the enging running dry untill full,and give accurate fill
How do I add oil? Where is the oil fill located? LOOK UNDER THE HOOD LOOK ON FRONT VALVE COVER THATS WHERE OIL FILL CAP LOCATED.YOU HAVE A OIL LEVEL DIP STICK BELOW THE FRONT VALVE COVER.LOOK ON THE ...
Question about HO0218 Oil Filled Electric Radiator Heater
My Pelonis oil filled radiator heater is leaking a small amount of oil apparently at the end which has the controls. The leak is underneath the unit. Is there anything I can do to stops this leak? ...
Question about HZ-709 Oil Filled Radiator Heater
I have a oil filled rad style electric heat ,which is leaking oil can it be fixed? If so how. Hi, Here is a tip that I wrote that will help you to understand about oil filled radiator heaters.... ...
nissan primera gearbox oil how do i change my gearbox oil Remove drain plug.After fluid drains, install drain plug.Remove fill plug.Fill with gear oil untill oil runs out of fill hole.Install fill ...
Question about HZ-709 Oil Filled Radiator Heater
New 2340 only takes 20 oz of oil on first fill I just got the new IR 2340 mounted and wired but when I added the first fill of oil, it would only take about 20 oz, not the 28 oz that the manual calls ...
Question about Generator 5989 2,700 PSI 2.3 GPM Gas Pressure Washer
No sight glass on my Generac Pressure washer nothing to tell me how much oil to use There is no dipstick, sight glass, no indicatior or anything to tell me how much oil to put in. There is just a plug
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions