Questions & Answers for: Porter Cable no fire

Gun wont fire the nails out?? That is a "feature" that will keep you from firing blanks when you don't want to. Have to have nails to fire!

My RN 175 roofing nailer (porter cable) fires like a machine gun. I cleaned the trigger valve assembly and replaced the o-ring at top of the asembly. Still fires in high repetition. With most nailers ...

gun fires mor than one nail at a time porter cable model da 250a 15 ga. finish nailer There are two issues that people have with nailers that sound the same however are totally different. Firing more ...

the nose of the gun against thick rubber or coiled air hose. Depress trigger and let go. Gun should fire and trigger pin will return to original position. If piston still does not retract then problem

only shoots out one nail for every 4 or 5 trigger pulls The gun will miss fire if the driver does not return to top position allowing nails to move into position. Could be bent driver, faulty trigger,

older coil350 doesnt fire on single fire. works as its supposed to on bump fire. Single fire just puffs a little air and thats it. As the contact arm and trigger inner lever wear, the trigger will not

...new nail clip into firing plunger. Nails stop just before they reach the plunger. After trying to fire a nail the plunger remains extended. could be a jammed nail in the nose assembly, try removing ...

Porter cable 350mag framer pin wont go back in and air coming out of the exhaust...It is brand new I used it on a deck today and this happened!!! FIRING VALVE IS STUCK IN OPEN POSITION,  FIRING ...

www.dewalt.com shoots two nails at a time Worn trigger valve orings will cause gun to fire twice, and /or attempting to single fire nail with bump-fire trigger.   Easy test,  look ...

New trigger valve leaked air and gun won’t fire. I have replaced the trigger valve twice and the problem is the same on both new valves. Porter cable FR350a. I find that the trigger valves in these ...