Questions & Answers for: how fit suspension

Ad

Question about 2003 Spectra

1 Answer

...I think is the same as a Spectra. (somebody correct me if that is wrong) I have had four new shocks fitted and have had a problem with one of the front shocks "crashing down" after a pothole or speed ...

Ad

Question about 1995 Cherokee

1 Answer

...suspension fit .please advice. If both vehicles are Grand Cherokee's a lot of the components will fit. Some of them are not worth putting used items on because they may already be worn out. The ...

Ad

Question about 2007 Ram Truck

1 Answer

...engine oil and engine oil filter Rotate tires Lubricate drivetrain / steering / suspension grease fittings (if equipped)-except Powerwagon Lubricate front drive shaft fitting (2500 / 3500, 4X4 & ...

...suspension parts would fit yes they will fit. be careful use all the suspension parts, life springs coils a-arms upper lowers its a all day projected get a coil spring compresser my cheavy conversion ...

...the suspension linkage link also.(need a complete rear suspension ???) or do i can you tell me what year/years model will fit. (1996-2001) or (1998-2003) & price approx. help!!!!!!!!!!!!! 98 to ...

Question about 2000 Grand Marquis

1 Answer

where are the grease fittings ? Manufacturers generally removed grease fitting from suspension part back in the 80's. Some put a removable plug in the ball joints, tie rod ends, etc, which could be ...

Question about 2000 Grand Marquis

1 Answer

after having two new suspension springs fitted a stop light flickker on now and again when driving with the hand brake light,is it a brake problem or hand brake unit fault. Take it back to where you ...

Question about 2006 Territory 4.0

1 Answer

...suspension clunks diagonosis clunking noise as i go over any bumps check that the exhaust system is fitted correctly and all the rubber straps are in good condition. Check for loose shock absorber ...

Question about 1993 Grand Marquis

1 Answer

Grease point location Front suspension and steering grease fittings Some original manufacturer suspension parts do not and can not be lubed. All lube-able fittings should be easily found.

...to fit on front slider? when fitting springs in a suspension, the procedure is to fit the springs first and then assemble to the suspension units , axles and cross shafts with the suspension

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...