...the main job of which is to insulate road noise from the body. Some cars use a swivel bearing fitted between the strut and lower spring cup. Worn shock absorber internal valves can be very
...suspension on this car should have struts, which means it will have two ball joints, one on each side. They are in the lower control arm, they connect the front bearing spindle to the lower control ...
...tired or worn rubber bushings on the the anti-roll (anti-sway) bar and control arms. Some cars are fitted with a steering damper arm and if this loses its damping effectiveness the steering will ...
...suspension, we're using the pickle fork but are unsure why the pin wont come loose... Can you help? I am going to make some assumptions here , by housing , i'm thinking that you mean the hub/knuckle ...
...be worn. Left front chassis leg could have bent due to accident or impact .Outer CV my have been fitted
...suspension must be checked, the WHELL ALIGNMENT must be checked with precision and each of the wheels must be checked for damage on hub, axle or chassis. Sounds like brake rotors are warped. At lower ...
...and rack ends. If these parts are dry or worn they can cause the problem you refer to. If the are fitted with greasing nipples gease them and test. The shock absorbers assembly can also give a ...
...fit the fist into the spread open fingers of the right hand ..rotate both hands together back and forth..your ncv axle turns in much the same way..when dirt gets into the joint due to cover ...
does my 2008 mazda tribute have grease fittings it might have some. have you even looked?? If it does you will see them on the universal joints, suspension and steering knuckles. Most are sealed.
Usually answered in minutes!
738 Questions
692 Questions
544 Questions
609 Questions
615 Questions