...to install the valves on a workbench. Removal of the modulator, replacement of the valve, and refit to the vehicle takes three hours or so. This shuttle valve repair is a huge improvement over
...to install the valves on a workbench. Removal of the modulator, replacement of the valve, and refit to the vehicle takes three hours or so. This shuttle valve repair is a huge improvement over
...fit. Any solutions? Thanks Most everything automotive is a "trade-off" between absolute performance, wear rate, durability and ride. ie: solid engine mounts on an engine would last far longer and ...
suspension at certain speeds when the wheel impacts a bump. Maybe changing springs would resolve it? It is not simple vibration but is extreme resonance of the what appears to be the whole front axle.
...fit rear air suspesion on discovery 2 You'll need to get the compressor, air lines, rear air bags, height sensors and access to a Nanocom, Rovacom, T4, Testbook, or IDS to turn the air suspension on ...
...like a tire, the solution is to look for it, with a spray bottle of soapy water. All the lines, fitting, valves, etc., are suspect. The actual chambers are the only expensive parts. There are
1999 TD5 series 3 discovery just had new front springs and rear height sensors fitted. Now self leveling warning light on and suspension over inflated and wont come down. Help ! Have you had the truck
...2, rear suspension lower Land Rover disco 2, rear air suspension lowering, new compressor assy fitted with no luck, no leaks detected - what to check next? SPRAY REAR AIR BAGS WITH SOAPY WATER ...
...same problem and got rid of the air suspension and put it on springs it cost 240 pound supplied and fitted easy to do and no more ...
Usually answered in minutes!
318 Questions
325 Questions
233 Questions
215 Questions
235 Questions